Motor Improvements for the Revolver 'Redwood' Turntable     

Improving Isolation & Grounding

The almost stock Revolver Redwood. (Upgraded inter-connect leads.)

The standard motor & AC power wire setup. (Note power lead contact with motor.)

Added rubber isolation pads to the motor mounting 'basket'.

The motor mounting cavity was ovalized to achieve almost zero contact between motor & plinth.

Soldered the ground wire directly to the motor and added foam dampening on motor bracket.

Fully re-mounted with minimal plinth contact from motor or power leads.

Rerouted the power cord to eliminate contact with motor bracket.